Page 54 - TELE-audiovision - The World’s Largest Digital TV Trade Magazine
Basic HTML Version
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
54
TELE-audiovision International — The World‘s Largest Digital TV Trade Magazine
— 05-06/2013
—
1. Main Menu (the first page)
- consists of: Find, Measure,
Spectrum and Angle
2. Main Menu (the second page)
- consists of: Setup and DiSEq
3. Find function - shows signal
strength and quality along
with the top values registered
during antenna setup; there
is also a beep generated with
pitch changing in accordance
with signal quality
4. Measure function -
transponder parameter
measurement results are
displayed here
5. Spectrum function - the full
bandwidth is shown; you can
also zoom to 320, 160 or 80 MHz
with the up/down arrow buttons
6. Angle function - displays
the calculated azimuth and
elevation angles for the entered
geographical coordinates of the
dish and the satellite position
7. Setup submenu - consists of
4 items: Version, Configure, Sat
Settings and Battery
8. Version - as you can see, we
tested a very early product with
serial number 000085
9. Configure submenu
- consists of five items:
Backlight, Timer, Beep, Units
and Contrast (the fifth one is
visible after four presses of the
right arrow button)
10. Satellite List - pops up right
after entering Sat Settings;
you are supposed to select
a satellite in order to view
its specific settings and
transponders
11. Transponder Settings - the
first page of two
12. Transponder Settings - the
second page of two
13. Battery - indicates how
much charge is still left in the
internal battery
14. Configure submenu (the
first page) - allows you to set
backlight (on/off), inactivity
timer (5, 15, 30 minutes or
always on), beep (on/off)
and units of power channel
measurement (dbuV, dBmV or
dBm)
15. Configure submenu (the
second page) - allows you to
set contrast of the display
